Water Repellents (Protector) are used for imparting a colourless water repellent surface finish to mineral building material without significantly reducing water vapour permeability. It is also used to provide a barrier against rising damp and last for a longer period.
|Packaging Type||Tin Can|
|Application Surface||Concrete, Masonry, Brick|
|State Of Matter||Liquid|
HAG WR 100 is a 100% silicon Water Repellents based on silicone multifunctional polymer technology, which yields microemulsion upon dilution with water. HAG WR 100 provides excellent water repellency within 48 hours of application which further improves depending upon the surface to surface.HAG WR 100 protects surfaces from damage caused by water intrusion and seepage, chloride ion intrusion, cracking caused by freeze/thaw cycles, spalling, scaling and helps prevent efflorescence and lime run.
Primer for decorative coating for masonry.
Capillary treatment of absorbent mineral and even alkaline substrates such as natural stone, brick, concrete and sand lime brick, facing brick, flower pot, gypsum and cement fiber board.
Adhesive for clays, ceramics starches and latex paint.
Capillary treatment for concrete protection.
Damp resistant course.
Primer for emulsion paint and plasters.
100% Silicone based micro emulsion
Capillary treatment, to maintain breathability
Good penetration and durability.
Water thinnable,environmentally compatible
Resistant to aggressive air borne pollutants
Highly permeable to co2.
Highly permeable to water vapour.
Improved freeze- thaw resistance.
Unchanged appearance of the substrate
Not a, breeding ground for fungi, algae and mosses.
Highly resistance to alkalis and salt water.
Protection not effected by weathering or UV light.
Very good penetration ability.
Ability to apply on old and new surfaces.
No solvent required for dilution.
Maintain paint ability.
Excellent working bath ability.